Installing a 2011-2013 Chevrolet 2500/3500 LED Grille Kit

SHARE IT!

Feature

The Rigid Industries Chevrolet 2500/3500 LED Grille Kit is designed specifically for the 2011-2013 Chevy Silverado 2500/3500 and allows for a clean, OE-quality install of Rigid Industries high output lighting. The lower grille of this kit accepts two (2) D-Series lights and one (1) SR-Series 6″ light bar. These 2-piece grilles are made from laser-cut 304 stainless steel and are assembled using stainless steel button socket head bolts and nyloc nuts – no welds. This unique LED grille kit features a high quality black powder-coat.

Features:pic 3
  • Aggressive Rigid Styling
  • Stainless Steel Construction
  • Black Powder Coat Finish
  • Includes All Necessary Hardware
  • Limited Lifetime Warranty
  • Made in the USA!

Tools Needed:

  • Pick Tool or Flat Head Screw Driver
  • Phillips Head Screw Driver
  • 10 MM Wrench or Socket
  • 7/16″ Wrench
  • Air Saw or Cut Off Wheel
  • File

Kit Includes: 

  • Two (2) D-Series lights
  • One (1) SR-Series 6″ light bar.

Pic 1

To find out more about this product visit: Rigid Industries 2011-2013 Chevy 2500/3500 LED Grille Kit.

Check out the Rigid Industries Install Video below with helpful information and tips as well as step-by-step instructions for installing the Rigid Industries 2011-2013 Chevy 2500/3500 LED Grille Kit. 

Important – It is strongly recommended that this product be installed by a professional.

Step #1 – Remove factory grille with a flat head screwdriver or a pick tool. Remove the dust cover. Take out the 10mm bolts and pop off the clips at the bottom of the factory grille with a flat head screwdriver.

Step #2 – Cutting and filing factory grille with a air saw or cut off wheel.

Step #3 – Install grille inserts.

Step #4 – Install Rigid Industries 2011-2013 Chevrolet 2500/3500 LED Grille Kit. Insert the black spacers on each side of the Dually’s or D2’s. Using the supplied hardware, tighten each light to their mounting brackets on the grille. Next, tighten down the supplied mounting hardware on your 10″ SR-Series LED light bar.

Step #5 – Re-install grille on to the truck. 10″ MM mounting bolts and clips are to be re-installed as well.

Comments

comments

Leave a Reply